Dual IGTB Module

Product Details:

Product Details:

Mitsubishi IGBT Modules are designed for use in switching applications. Each module consists of two IGBTs in a half-bridge configuration with each transistor having a reverse-connected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management.

Features: 

• Low Drive Power 
• Low VCE(sat) 
• Discrete Super-Fast Recovery Free-Wheel Diode 
• High Frequency Operation 
• Isolated Baseplate for Easy Heat Sinking 

Applications:

• AC Motor Control 
• Motion/Servo Control 
• UPS 
• Welding Power Supplies 

Ordering Information:

• Example: Select the complete part module number you desire from the table below -i.e. CM50DY-24H is a 1200V (VCES), 50.

Additional Information:

• Item Code: VP-IGBTM-0162

Product Details:

Features:

• Square RBSOA
• Low Saturation Voltage
• Less Total Power Dissipation
• Improved FWD Characteristic
• Minimized Internal Stray Inductance
• Over current Limiting Function (~3 Times Rated Current)

Applications:

• High Power Switching
• A.C. Motor Controls
• D.C. Motor Controls
• Uninterruptible Power

Additional Information:

• Item Code: 2MBI75N-060

Product Details:

Electrical properties:

Additional Information:

• Item Code: VP-IGBTM-0204

Product Details:

FSAM15SH60 is an advanced smart power module (SPM) that Fairchild has newly developed and designed to provide very compact and high performance ac motor drives mainly targeting high speed low-power inverter-driven application like washing machines. It combines optimized circuit protection and drive matched to low-loss IGBTs. Highly effective short-circuit current detection/protection is realized through the use of advanced current sensing IGBT chips that allow continuous monitoring of the IGBTs current. System reliability is further enhanced by the built-in over-temperature monitoring and integrated under-voltage lock-out protection. The high speed built-in HVIC provides opto-coupler-less IGBT gate driving capability that further reduce the overall size of the inverter system design. In addition the incorporated HVIC facilitates the use of singlesupply drive topology enabling the FSAM15SH60 to be driven by only one drive supply voltage without negative bias. Inverter current sensing application can be achieved due to the divided negative dc terminals.

Features:

• IGBT inverter bridge including control ICs for gate driving and protection
• Divided negative dc-link terminals for inverter current sensing applications
• Single-grounded power supply due to built-in HVIC
• Built-in thermistor for over-temperature monitoring
• Very low leakage current due to using ceramic substrate
• Adjustable current protection level by varying series resistor value with sense-IGBTs

Applications:

• Inverter drive for small power (0.8kW) ac motor drives
• Home appliances applications requiring high switching frequency operation like washing machines drive system

Application ratings:

• 100% load current 5.0A (Irms)
• 150% load current 7.5A (Irms) for 1 minute

Additional Information:

• Item Code: VP-IGBTM-0415

Product Details:

High Power Switching Applications Motor Control Applications:

• The electrodes are isolated from case.
• 6 IGBTs are built into 1 package.
• Enhancement−mode
• Low saturation voltage: VCE(sat) = 4.0V (max.) (IC = 20A)
• High speed: tf = 0.35µs (max.) (IC = 20A) trr = 0.15µs (max.) (IF = 20A)

Additional Information:

• Item Code: VP-IGBTM-0474

Product Details:

Features:

• International standard package
• Glass passivated chips
• RoHS compliant

Applications:

• Motor control
• Power converter
• Heat and temperature control for industrial furnaces and chemical processes
• Lighting control
• Contactless switches

Advantages:

• Space and weight savings
• Simple mounting
• Improved temperature and power cycling
• Reduced protection circuits

Additional Information:

• Item Code: VP-IGBTM-0504

Product Details:

Applications:

• AC drive inverters & Servo controls, etc.

 

Additional Information:

• Item Code: VP-IGBTM-0171

Product Details:

Features:

• IGBT4 = 4. generation fast trench IGBT (Infineon)
• CAL4 = Soft switching 4. generation CAL-diode
• Isolated copper baseplate using DBC technology (Direct Bonded Copper)
• Increased power cycling capability
• With integrated gate resistor
• For higher switching frequencies up to 20kHz

Typical Applications:

• AC inverter drives
• UPS
• Electronic welders at fsw up to 20 kHz

Additional Information:

• Item Code: VP-IGBTM-0004

Product Details:

Features:

• Trench = Trenchgate technology
• VCE(cat) with positive temperature coefficient
• High short circuit capability, self limiting to 6 x IC

Typical Applications:

• AC inverter Drives
• UPS
• Electronic welders.

Additional Information:

• Item Code: VP-IGBTM-0010

Product Details:

Mitsubishi IGBT Modules are designed for use in switching applications. Each module consists of two IGBTs in a half-bridge configuration with each transistor having a reverse-connected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management.

Features:

• Low Drive Power
• Low VCE(sat)
• Discrete Super-Fast Recovery Free-Wheel Diode
• High Frequency Operation
• Isolated Baseplate for Easy Heat Sinking

Applications:

• AC Motor Control
• Motion/Servo Control
• UPS
• Welding Power Supplies.

Ordering Information:

• Example: Select the complete part module number you desire from the table below -i.e. CM100DY-24H is a 1200V (VCES), 100 Ampere Dual IGBT Module

Additional Information:

• Item Code: VP-IGBTM-0134

Product Details:

Features:

• NPT- Non punch-through IGBT
• Low tail current with low temperature dependence
• High short circuit capability, self limiting if term. G ic clamped to E
• Poc. temp.-coeff. of VCEcat
• 50 % less turn off losses
• 30 % less short circuit current
• Very low Ciec, Coec, Crec
• Latch-up free
• Fast & soft inverse CAL diodes
• Isolated copper baceplate using DCB Direct Copper Bonding Technology without hard mould
• Large clearance (13 mm) and creepage distances (20 mm)

Typical Applications:

• Switching (not for linear use)
• Switched mode power supplies
• AC inverter servo drives
• UPS uninterruptable power supplies
• Welding inverters.

Additional Information:

• Item Code: VP-IGBTM-0012

Product Details:

Mitsubishi IGBT Modules are designed for use in switching applications. Each module consists of one IGBT in a single configuration with a reverse-connected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management.

Features:

• Low Drive Power
• Low VCE(sat)
• Discrete Super-Fast Recovery
• Free-Wheel Diode
• High Frequency Operation
• Isolated Baseplate for Easy Heat Sinking

Applications:

• AC Motor Control
• Motion/Servo Control
• UPS
• Welding Power Supplies

Ordering Information:

• Example: Select the complete part module number you desire from the table below -i.e. CM600HA12H is a 600V (VCES), 600 Ampere Single IGBT Module.

Additional Information:

• Item Code: VP-IGBTM-0050
• Port of Dispatch: courier
• Production Capacity: 1000
• Delivery Time: immediatly else 2-3 weeks

Product Details:

Application:

• AC & DC motor controls
• General purpose inverters
• Servo controls
• NC
• Robotics

Additional Information:

• Item Code: VP-IGBTM-0152

Product Details:

Features:

• Package With Dcb Ceramic Base Plate
• Isolation Voltage 3600 V~
• Planar Passivated Chips
• Soldering Terminals
• Ul Registered E 72873

Applications:

• Input rectifier for switch mode power supplies (SMPS)
• Softstart capacitor charging
• Electric drives and auxiliaries

Advantages:

• Easy to mount with two screws
• Space and weight savings
• Improved temperature and power cycling

Additional Information:

• Item Code: VVZ24

Product Details:

Additional Information:

• Item Code: VP-IGBTM-0214

Product Details:

Additional Information:

• Item Code: VP-IGBTM-0168

Product Details:

Additional Information:

• Item Code: VP-IGBTM-0230

Product Details:

Additional Information:

• Item Code: VP-IGBTM-0151

Product Details:

Features

• IGBT4 = 4. generation fast trench IGBT (Infineon)
• CAL4 = Soft switching 4. generation CAL-diode
• Isolated copper baseplate using DBC technology (Direct Bonded Copper)
• Increased power cycling capability
• With integrated gate resistor
• For higher switching frequenzies up to 20kHz
• UL recognized, file no. E63532

Typical Applications:

• AC inverter drives
• UPS
• Electronic welders at fsw up to 20 kHz.

Additional Information:

• Item Code: VP-IGBTM-0002

Product Details:

Additional Information:

• Port of Dispatch: courier
• Production Capacity: 1000
• Delivery Time: immediatly else 2-3 weeks

Product Details:

It is an advanced motion-smart power module (Motion-SPMTM) that Fairchild has newly developed and designed to provide very compact and high performance ac motor drives mainly targeting low-power inverter-driven application like air conditioner and washing machine. It combines optimized circuit protection and drive matched to low-loss IGBTs. System reliability is further enhanced by the integrated under-voltage lock-out and short-circuit protection. The high speed built-in HVIC provides opto-coupler-less single-supply IGBT gate driving capability that further reduce the overall size of the inverter system design. Each phase current of inverter can be monitored separately due to the divided negative dc terminals.

Features:

• 600V IGBT inverter bridge including control ICs for gate driving and protection
• Easy PCB layout due to built in bootstrap diode
• Divided negative dc-link terminals for inverter current sensing applications
• Single-grounded power supply due to built-in HVIC

Applications:

• Inverter drive for small power ac motor drives
• Home appliances applications like air conditioner and wash- ing machine.

Integrated Power Functions:

• 600V-15A IGBT inverter for three-phase DC/AC power conversion.

Integrated Drive, Protection and System Control Functions:

• For inverter high-side IGBTs: Gate drive circuit, High voltage isolated high-speed level shifting Control circuit under-voltage (UV) protection Note) Available bootstrap circuit example is given in Figures 12 and 13. 
• For inverter low-side IGBTs: Gate drive circuit, Short circuit protection (SC) Control supply circuit under-voltage (UV) protection 
• Fault signaling: Corresponding to UV (Low-side supply) and SC faults 
• Input interface: 3.3/5V CMOS/LSTTL compatible, Schmitt trigger input.

Additional Information:

• Item Code: VP-IGBTM-0418
• Port of Dispatch: courier
• Production Capacity: 1000
• Delivery Time: immediatly else 2-3 weeks

Product Details:

Additional Information:

• Item Code: VP-IGBTM-0056
• Port of Dispatch: courier
• Production Capacity: 1000
• Delivery Time: immediatly else 2-3 weeks

Product Details:

Additional Information:

• Item Code: VP-IGBTM-0311

Product Details:

Application:

• General purpose inverter & servo controls etc.

 

Additional Information:

• Item Code: VP-IGBTM-0021