V. P. Electronics

Fixed input voltage, Isolated & unregulated output, Output power 3W ◆ High Efficiency up to 86% ◆ Small compact SIP packing ◆ No external component required ◆ Isolation Voltage 3000VDC ◆ Operating Temperature: -40°C~+85°C ◆ Plastic Case, meet UL94 V-0 standard

K7805-1000R3 Mornsun 5V Output DC-DC Converter 1W Power Supply Module – SIP Package is designed for applications where an isolated voltage is required in a distributed power supply system. 

◆ Ultra Wide input voltage range 100-1000VDC ◆ No-load consumption≤0.4W ◆ Switching Frequency: 65KHz ◆ Transfer efficiency up to 85% (Typ.) ◆ Protection: against reverse, over-voltage protection, over-current, short circuit protection ◆ Isolation voltage: 4000VAC ◆ Meet IEC/EN623668 test standard ◆ Comply with CE & RoHS certification ◆ Fully enclosed plastic case, complied with UL94V-0 level

Wide input voltage range（4:1）Output Power 50W Ultrathin Package：13mm Transfer Efficiency up to 90% Stand-by Power Consumption as low as 3W Output super-fast start up as low as10ms Continuous Short Circuit protection, Self-recovery Input under voltage, output over voltage, short circuit, over current protection Switching Frequency 300KHz Isolation Voltage 3000VDC/1500VAC Operating Temperature: -40°C~+85°C Good EMI performance International standard pin-out

The Delphi Series E36SR Eighth Brick, 18~75V input, single output, isolated DC/DC converter is the latest offering from a world leader in power systems technology and manufacturing — Delta Electronics, Inc. This product family operates from an extremely wide 18~75V input range and provides up to 75 watts of power in an industry standard eighth brick footprint and pinout. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performances, as well as extremely high reliability under highly stressful operating conditions. All models are fully protected from abnormal input/output voltage, current, and temperature conditions. The Delphi Series converters meet all safety requirements with basic insulation.

Features:

• High efficiency: 89% @ 5V/ 15A
• Size: 58.4mm x 22.8mm x 9.2mm (2.30”x0.90”x0.36”) ( W/O heat-spreader ) 58.4mm x 22.8mm x 12.7mm (2.30”x0.90”x0.5”) ( With heat-spreader )
• Industry standard pin out
• 18~75V extremely wide 4:1 input range
• Fixed frequency operation
• Input UVLO, Output OCP, OVP and OTP
• 2250V isolation
• Basic insulation
• No minimum load required
• SMD and through-hole versions
• ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility
• UL/cUL 60950-1 (US & Canada) Recognized.

Options:

• Positive On/Off logic
• Short pin lengths available
• SMD pin
• Heat spreade

Applications:

• Telecom / Datacom
• Wireless Networks
• Optical Network Equipment
• Server and Data Storage
• Industrial / Testing Equipment

The PIM300X-series is the higher power version of its highly successful predecessor, the PIM200X series. Besides providing higher power over extended temperature range, the module is pin compatible and retains the same form factor as the PIM200X series for ease of upgrading to higher power or thermally challenging ATCA board designs. The PIM200X/300X series are a new class of power modules designed to greatly simplify the task of implementing dual redundant, hot swap – 48Vdc power distribution with EMI filtering on an ATCA or other telecom boards. The PIM300X, when used with a variety of GE’s dc-dc converters/POLs provides for a quick, simple and elegant power architecture solution to a wide variety of complex power requirements. While providing high reliability, innovative features and compact design at a low cost, the module significantly reduces the valuable telecom board real estate compared to conventional discrete designs. Besides processing the main –48V bus, the module greatly simplifies the task of powering the IPM (for ATCA applications), system management or other housekeeping functions by providing a completely isolated auxiliary 3.3V or 5.0V power bus. 

S48SR05003ERFA
Input Voltage - 36V~75V 
Input Current -  0.6A
Output Voltage - 5.0V
Output Current - 3.0A
Mounting type- throw holl